Наши дилеры

Сертификаты

Алфавитный указатель
марок электродов

Статьи сварочной
тематики

Вакансии.

Сделать заказ

English

Our electrodes are of various destination: for welding of mild and alloyed steels, heat resistant, corrosion resistant, creep resistant high alloyed steels; copper and nickel alloys, cast irons; for manufacturing and repairing deposition. There is not a branch of industry which does not used electrodes of our Company. Some of our grades and sizes of electrodes are not supplied by others Russian enterprises. For consumer’s special desire it is easy to produce electrodes of diameter 3,15 and 3,25 mm in accordance with GOST.

The innovation potential of the Company organised by leading specialists of Moscow experimental welding factory, is based on the more than half age experience of specialising in the field of everything connected with welding electrodes. These are: investigation and development of electrodes of various destination, equipment and devices for their manufacturing using in different branches of industry, commercial delivery of electrodes to numerous consumers. In that way all the links of electrode production from applied investigations till manufacturing and testing of experimental industrial production, delivery and engineering are concentrated in “united hands”. This allows not only to respond efficiently to consumer’s requirements or to technical and economic conditions of producing being changed with speed, but also to discover often forestalling technical decisions.

Please note the following in the use of this catalogue.
1. Standards of Welding
Consumables
The Standards used here are abbreviated as follows:
ГОСТ - Russian National Standard AISI - American National Standard AWS - American Welding Society DIN - Deutsches Institut fur Normung
ISO - International Organisation for
Standardisation.

2. Description of designation
Number of electrodes per kg electrodes is calculated on average. Current and polarity:
AC - alternative current
DC(+) - direct current, plus on electrode
DC(-) - direct current, minus on electrode
DC - direct current, plus or minus depending on electrode positions at welding
The catalogue of our Company production has been designed to enable you to find easily the coated electrodes required for your welding work. We feel sure that the quality and service, which we could to offer, will fully satisfy your requirements.

Our Company has “Advice Service” for helping purchaser to make right choice of welding consumables and technology for welding and depositing of different materials

In accordance with continuous investigation and improvement of coated electrodes by Company’s “Research Service” some difference from information introduced in the catalogue can be obtained.

Electrodes in this catalogue are divided into several groups:
- electrodes for welding of mild, carbon and low alloyed structural steels;
- electrodes for welding of alloyed structural steels of high and higher strength;
- electrodes for welding of heat resistant steels;
- electrodes for welding of high alloyed steels and alloys;
- electrodes for depositing;
- electrodes for welding and depositing of different cast irons;
- electrodes for welding of non- ferrous alloys;
- electrodes for cutting of different materials.
Description of each grade of covered electrodes contains usage and application of the electrode, electrode’s characteristics including mechanical properties and chemical analysis of all weld metal, size of electrode and welding parameters, special properties and technological features of welding process.

The description of electrodes makes possible to choose electrode, which give to purchaser the right weld metal and quality at the lowest cost. All grades of electrodes of our Company are certified by Russian and Ukrainian “Gostandard”, and some of the grades - by Russian Maritime Register of Shipping and by Lloyd’s Register of Shipping (UK).

The information of catalogue can be useful for specialists of different fields of welding.